A Look At The Good And Bad About Ghost Autowatch Immobiliser
Autowatch Ghost Immobiliser
The well-known Ghost Immobiliser provides your vehicle with advanced protection against key-cloning as well as theft, hacking and hacking. This TASSA certified system is inaccessible to thieves and prevents the thieves from starting your vehicle.
This silent device makes use of buttons on the steering wheel, the centre console, and on the door panels of your vehicle. This allows you to create an individual PIN code that is up to 20 characters that needs to be entered prior to the car can start.
Easy to install
With car theft on the rise and cloning equipment readily available it is more important than ever to protect your vehicle. Our Autowatch Ghost immobiliser provides a discrete, effective and aftermarket solution for protecting against key-cloning and car theft. The unit is virtually undetectable to thieves and works through existing buttons in the steering wheel or door panels, as well as the central console. This lets customers create a unique disarming sequence like credit cards that need to be entered before a car is able to be started or driven away. This makes the system almost impossible to spot and is also unaffected by spoofing or jamming devices that are used in other systems available.
The installation of the Ghost unit is a highly-specialized process and must only be done by an authorized installer. The unit is carefully integrated into the vehicle's CAN bus system, ensuring it communicates directly to the ECU. The Ghost can be installed without altering the factory settings, and it is not possible for thieves to evade the system with signal boosters.
After the Ghost has been installed it is necessary to enter a new and improved disarming sequence in order to activate your vehicle. Press the service button five times in 2 seconds, but ensure you don't press it for too long. The system will flash twice to signal that Transport Mode is active. This feature is perfect for classic, sports or high-end vehicles that require to have their security system temporarily disabled while transporting or maintenance.
After Transport Mode has been activated the immobiliser will be disabled and cannot be reactivated by entering your PIN code again. This feature is ideal for those who wish to store their vehicles over the winter to prevent theft or to avoid paying higher insurance rates.
There are no key-fobs, LEDs or other indicators to reveal the location of the vehicle.
The Ghost immobiliser protects your car from thieves by pressing buttons on the dashboard or steering wheel. You can enter a pin code without being noticed before you start the engine. It protects against attacks using signal relays, ECU swapping and key cloning. click the next page can also be linked to a mobile application to arm or disarm remotely. It's easy to install and can be installed in a range of vehicles. It's also extremely discreet, and can be hidden in a hard-to reach location such as behind the dashboard or within the trim of the steering wheel.
This is a great choice for vehicles with high performance because it can shut off your vehicle's ignition if the wrong pin code has been entered. This prevents thieves from stealing your pride and joy. The device can also send an alert to your mobile when you've left the vehicle unattended in public areas, providing you with peace of mind when you're away from your vehicle.
In contrast to other immobilisers, the Ghost doesn't require any extra fobs or LEDs, and can be hidden easily in a hard-to-reach area inside your vehicle. It communicates directly with the vehicle's CAN data network, making it highly resistant to detection. It doesn't emit radio signals so it is undetectable by signal jammers or RF scanners.
It is designed to be weatherproof and tamper-proof. It also has the ability to be able to withstand extreme temperatures. It is also unaffected by tampering with by cutting the wires or dismantling the device. It is also undetectable by organized gangs of thieves that employ diagnostics reading devices to detect security systems. It's also not affected by professional auto diagnostics equipment that checks the CAN data system for the presence of a security device.
No circuit cuts
The device is not include any LED indicators or key fobs to indicate its location. It is hidden under the steering wheel, dashboard or dashboard of your vehicle and uses buttons to generate a unique PIN sequence that must be entered to turn on the engine. The thief cannot drive away the vehicle even if they have your keys because they don't know the correct code. The device doesn't transmit radio signals meaning that organised thief gangs using diagnostics reading devices will be unable to recognize the device.
This cutting edge immobiliser is TASSA approved and can reduce your insurance premiums, especially for vehicles that have been modified by their owners. It also wards off key cloning theft as well as ECU swapping, which means that the only way for a thieves can take your joy and pride is to take it away.
The system is completely quiet as it does not utilize the buttons on the dashboard or factory keys. It communicates with the ECU via the CAN data circuit which is completely silent and does not give any indication that it has been installed. It means that a criminal would not be able to make new key fobs or swap out the ECU in order to get your car to start. This eliminates any other methods of theft that have been used in recent years, such as key cloning scans using radio frequency, and code grabbing.
If you forget your PIN code, our engineers have provided a reset emergency for the device that allows you to enter "service mode". This will allow dealers or technicians to temporarily drive and start your vehicle and perform MOTs, maintenance work, or valet parking. When the technician is finished their work or you have collected your vehicle, simply enter the PIN code and the device will be out of service mode dependent on speed and duration.
No radio signals
The Ghost immobiliser, unlike many other car security systems, does not rely on an alarm system or key fobs to block vehicles from starting. Instead it communicates with the vehicle's ECU and the CAN data circuit to stop the engine from starting. This makes it a quiet solution that isn't affected by key cloning or RF scanning techniques employed by thieves to circumvent other security devices. It can be used in conjunction with tracking devices to enhance the security of your vehicle. You will also be alerted if there is any attempt to alter or steal.
The Autowatch Ghost, a TASSA certified device, is affixed to insurance and provides an excellent level of security against key hacking as well as the cloning. It makes use of a mobile application to control the device. It is encrypted to protect. It also has a secure emergency PIN code override. It's a reliable, discreet and cost-effective way to safeguard your vehicle from theft.
Ghost isn't without issues. One of the most frequent issues is that people struggle to enter the correct disarm sequence. The device requires input via buttons already present on your vehicle, like buttons on the steering column or on the centre console. Users might find this difficult to remember or even miss particularly when the device is being used for the first time. It is recommended to read the manual included with the device and practice the disarming process prior to driving.
Another issue is that certain vehicles have issues with the CAN data connections, which could affect Ghost's capabilities. This could be caused by faulty sensors or a damaged OBD port. It is recommended to have the system tested again before using it in case there are any issues with the CAN connection.
Change PIN code easily
The Ghost is a fantastic device and has taken the market by storm but the pin code changing process can be a bit confusing. The device is pre-programmed by the installer when it's installed however there are occasions when people prefer to change their pin code for a variety of reasons like: they would prefer a different button to disarm the device, they don't want their installer to know or they just simply don't like the pin number they have currently. The good news is that the change over to a new pin number is incredibly easy. Follow the simple instructions below to learn how.
Be aware that you will need to turn the ignition on but do not start your vehicle! The process takes only just a few seconds to complete. The vehicle will then resume normal operation.